Pink & White Striped Diamond Puff Sleeve Blouse
A puff sleeve blouse in 60%polyester 40%lyocell. Lyocell brings a fluid drape and a cooler hand than cotton at the same weight, and its weakness is the wet state: it loses strength when wet, so wash handling and shrinkage control carry the quality.
A puff sleeve blouse in 60%polyester 40%lyocell. Lyocell brings a fluid drape and a cooler hand than cotton at the same weight, and its weakness is the wet state: it loses strength when wet, so wash handling and shrinkage control carry the quality.
Fit and construction
Cut to a puff sleeve silhouette, with the fabric decision driving the fit: shrinkage measured after wash, seam slippage checked at stress points.
What you can change
- Collar style and stand height per your artwork
- Cuff and placket details per your tech pack
- Lyocell ratio against cotton, per hand feel target
- Garment wash for a softer hand
Specification
| Style | Puff sleeve blouse |
|---|---|
| Fit | Puff sleeve line |
| Collar | Per your tech pack |
| Closure | Buttons or zip, per your tech pack |
| Fabric | 60%polyester 40%lyocell |
| Construction | Shrinkage measured after wash, stress seams reinforced |
| Minimum order | 50 pcs per style, sizes mixed |
| Size range | XS to XXL, or your grade |
Lead time and inspection
Bulk runs 45-90 after PP approval and fabric confirmation. Sampling takes 7-10 days when the fabric is in house and 10-15 days when it is not. Every piece is inspected by default; where you specify AQL 2.5 we run sampling inspection to that standard instead, against ISO 2859-1, and send the report with the goods.
A woven program like this one runs at our knit and woven plant, where cutting and sewing sit under one QC protocol. Two plants, one standard, one merchandiser following your order across both. Other styles in this line sit under Shirts & Blouses.
Questions buyers ask
Does lyocell shrink or lose shape after washing?
We measure shrinkage after wash on the approval fabric and pre-shrink where needed, so the measurement chart you approve stays the chart the customer wears.
Can the collar and placket details be changed?
Yes. Collar style, stand height, placket width and cuffs are all pattern variables built from your tech pack, confirmed on the approval sample.
What is the MOQ for this style?
50 pcs per style, sizes mixed inside that quantity. Colourways of the same style are quoted case by case.
What is the bulk lead time?
45 to 90 days for woven garments, counted after PP approval and fabric confirmation. Sampling runs 7 to 10 days when the fabric is in house, 10 to 15 days when it is not.


























