Apparel Sourcing Glossary
Terminology mismatch is one of the most common causes of sampling rework. This page lists the fabric and process terms most often misunderstood between buyers and Chinese factories, with definitions both sides can quote directly.
What Is GSM in Fabric?
GSM is grams per square metre, the weight of one square metre of fabric. It is the standard way to compare fabric weight across suppliers and to predict how a garment will hang and wear.
Why the number matters
GSM turns a vague description into a checkable number. A quote for a 180 gsm single jersey and one for a 280 gsm loopback are different garments at different prices, so weight is the fastest way to compare two suppliers on the same fabric. Weight also drives hand feel, drape, warmth and shipping cost.
How to put it in a spec
State the target GSM with a tolerance, for example 200 gsm ±5%, and ask for the tested value from a cut square weighed on a calibrated scale rather than a swatch-card figure. Confirm the reading again on the PP sample, because mills sometimes substitute a nearby construction when the exact one is out of stock.
Related: GSM to oz converter · knit vs woven fabric · manufacturing capacity
What Is a Knit Top?
A knit top is any upper-body garment knitted from yarn rather than cut from woven fabric, from T-shirts and fine-gauge sweaters to knitted blouses.
How knits differ from wovens
A knit top starts as yarn looped into fabric on circular machines, so the fabric stretches on its own before any elastane is added. Woven tops are cut from fabric made of two yarn sets interlacing at right angles, which holds its shape and only stretches if elastane is added. That difference decides cost, recovery and how the garment is graded.
Which line makes which
Jersey, rib and interlock tops are cut and sewn from circular-knit fabric; circular gauges run from 12G to 28G. Fine-gauge sweaters and heavier knitted outerwear are knitted to shape on flat machines on the sweater line, where gauges run from 7GG to 18GG. Say which one you mean, because the two routes have different sampling paths and lead times.
Related: knit tops category · knit & woven manufacturer · knit vs woven fabric
What Is Cut and Sew?
Cut and sew describes making a garment by cutting fabric to a pattern and stitching the pieces together, rather than knitting panels directly to shape.
Cut and sew versus knit-to-shape
Cut and sew means the fabric is made first, then laid up, cut to a pattern and stitched. Knit-to-shape (fully fashioned) knits each panel to its final shape and links the pieces, which wastes less yarn but locks the design to the knitting machine. Cut and sew gives you free pattern-making and easier size grading, which is why most jersey and woven programmes use it.
What a factory needs from you
A measurement spec, a size grade and a reference sample are enough to start. Patterns are made, a marker is laid on the fabric and the pieces are cut before sewing. Minimums start at 50 pieces per style.
Related: OEM/ODM services · knit vs woven fabric · production process
What Is a Jumper in Clothing?
In the UK a jumper is a knitted sweater. In the US the same word usually means a sleeveless pinafore dress. Buyers should state which meaning a specification uses.
Why the word causes trouble
In the UK a jumper is a knitted sweater, pullover or cardigan. In the US the same word usually means a sleeveless pinafore dress. A US buyer asking for jumpers and a UK buyer asking for jumpers are asking for two different garments, and the mistake usually surfaces at the first sample.
How to write it in a spec
Write the garment type in plain words, for example knitted pullover, cardigan or pinafore dress, and add gauge, yarn and weight. Flat knitting gauges run from 7GG to 18GG, and the gauge you pick sets how fine the knit looks.
Related: sweater manufacturer · clothing manufacturer UK · sweater vs sweatshirt
Is Viscose the Same as Rayon?
Yes. Viscose and rayon are the same regenerated cellulose fibre under two names. The difference is regional usage, not the fibre itself.
Why two names for one fibre
Rayon is the name that spread through the American market; viscose is the one used in Europe and by most mills. Both describe the same regenerated cellulose fibre made from wood pulp, so a viscose shirt and a rayon shirt are the same fabric under two labels. Ask for the fibre composition on the test report rather than the name on the swatch.
Using it in a programme
Viscose drapes well and takes dye deeply, but it wrinkles and loses strength when wet, so it is often blended with polyester or nylon for stability. Confirm the blend ratio and the finish on the lab dip, because the same yarn reads very differently after a soft wash.
Related: woven apparel manufacturer · sustainable yarns · cupro & modal
What Is Cupro Fabric?
Cupro is a regenerated cellulose fibre made from cotton linter, valued for a silk-like drape and sheen. Modal is a similar fibre made from beech pulp, and the two are often blended with silk or cotton.
Cupro and modal in one line
Cupro is made from cotton linter and is prized for a silk-like drape and sheen. Modal comes from beech pulp and is smoother and stronger when wet. Both are regenerated cellulose fibres and both are commonly blended with cotton or silk in dresses, blouses and linings.
Confirming availability
These yarns are not held in the same depth as cotton or polyester, so availability is confirmed programme by programme. Check the yarn route before you lock a tech pack, and ask for a hand-feel sample, because cupro reads differently depending on the mill that made it.
Related: woven apparel manufacturer · viscose vs rayon · dress category
Is a 50 Cotton 50 Polyester Blend Good?
A 50/50 cotton polyester blend balances the breathability of cotton with the dimensional stability and lower cost of polyester, at the expense of some natural hand feel. It suits high-wash programmes and stable-price basics.
What the blend trades away
The cotton half keeps the garment breathable and able to take print; the polyester half holds the shape through repeated washing and keeps the price stable. What you give up is part of the natural hand of all-cotton, and low-grade blended yarns pill faster.
When it is the right call
Pick it for basics and uniform-style programmes that get washed hard and priced tightly. Pick a higher cotton content when hand feel sells the garment. If recycled polyester matters to your programme, it can be specified; where a certified recycled yarn route applies, the GRS transaction document is issued with the goods.
Related: knit vs woven fabric · manufacturing cost breakdown · GRS certification
What Is Sherpa Fabric?
Sherpa is a knitted fleece with a wool-like pile on one face, usually polyester and sometimes cotton-backed, used for linings, jackets and gilets.
Where sherpa earns its place
Sherpa lines collars, jacket bodies, gilets and blanket-style outerwear where you want the look of shearling without the weight or the price. The pile side gives loft; the knitted backing sews like a normal knit.
Specifying it
Give pile height, backing type and fibre content. Most sherpa is polyester; cotton-backed versions feel drier. Loft varies a lot between mills, so judge it on a physical sample rather than a photo.
Related: woven apparel manufacturer · twill vs canvas · jackets category
What Is Waffle Knit?
Waffle knit is a knitted structure with a grid of raised squares that traps air, giving warmth without weight. It is used for thermal layers, robes and relaxed tops.
Why the grid traps warmth
The raised grid creates air pockets, so the fabric holds warmth without adding weight. That is why it shows up in thermal layers, loungewear and robes, and why it reads heavier than it weighs.
Specifying it
GSM and grid size are the two numbers that matter. Waffle structures run on circular knitting and are cut and sewn like jersey, so sampling follows the knit route rather than the sweater route.
Related: woven apparel manufacturer · intarsia knitting · GSM in fabric
What Is the Difference Between Twill and Canvas?
Twill is a weave with a diagonal rib that drapes well and resists creasing. Canvas is a heavy plain weave that is stiffer and more abrasion resistant. Twill suits trousers and shirts, canvas suits bags and heavy outerwear.
Choosing between them
Twill's diagonal rib lets it drape and resist creasing, which suits trousers, skirts and shirts. Canvas is a heavy plain weave that stands up and resists abrasion, which suits structured outerwear and heavy-duty uses. The same yarn count can behave differently in each weave, so judge the fabric in the weight you plan to order.
Weight and finish
Both are bought by weight in ounces or GSM. A garment dye or enzyme wash softens canvas noticeably; twill often gets a closer finish to keep the rib crisp.
Related: woven apparel manufacturer · what weft means · trousers & shorts
What Is the Difference Between Garment Dye and Piece Dye?
Piece dyeing colours fabric before cutting. Garment dyeing colours the finished garment, giving a softer hand and a washed look but adding shrinkage risk and lead time.
Which route to pick
Piece dyeing colours the fabric before cutting, so every size in the order matches and repeat orders land on the same shade. Garment dyeing colours the finished garment, which gives a softer hand and a washed character and lets you commit to colour closer to season. The trade is shrinkage control and extra days on the critical path.
Planning for garment dye
Patterns need pre-shrinkage built in, lab dips are replaced by garment-level swatches, and the dye lot sets a minimum. Plan the extra lead time from the start rather than trying to win it back later.
Related: quality control process · woven apparel manufacturer · manufacturing capacity
What Does Weft Mean?
Weft is the horizontal yarn interlaced through the warp in a woven fabric. The warp runs lengthwise on the loom and sets the grain, which is why the two directions behave differently in stretch and drape.
Weft and warp in one look
Weft is the horizontal yarn; warp is the lengthwise one. In a woven fabric the warp sets the grain and carries the tension on the loom, which is why fabric behaves differently along each direction and why panels are cut with the grain line in a set direction.
Why it matters to your garment
Grain decides how a skirt swings and whether a shirt collar rolls. If a sample hangs oddly, the first thing a machinist checks is whether the panels were cut on grain.
Related: twill vs canvas · woven apparel manufacturer · knit vs woven fabric
Still unsure which term applies to your order?
Send us your spec or read how custom clothing manufacturing works.
