Vintage Floral Print Stand Collar Jacket
A vintage floral print stand collar jacket in 72.8%polyester 26.1%cotton 1.1%spandex 275gsm lining:100%polyester jacquard. A jacquard is only as good as its pattern matching: the repeat is designed into the fabric, and a marker that ignores it breaks the motif across the centre back and the side seams where every eye lands.
A vintage floral print stand collar jacket in 72.8%polyester 26.1%cotton 1.1%spandex 275gsm lining:100%polyester jacquard. A jacquard is only as good as its pattern matching: the repeat is designed into the fabric, and a marker that ignores it breaks the motif across the centre back and the side seams where every eye lands.
Fit and construction
Cut to a vintage floral print stand collar silhouette, with the fabric decision driving the fit: repeat measured and matched across centre seams before cutting.
What you can change
- Closure and pocket layout per your tech pack
- Lining weight and colour per your artwork
- Pattern matching points, per your artwork
- Fabric weight and ground yarn swapped to budget
Specification
| Style | Vintage floral print stand collar jacket |
|---|---|
| Fit | Vintage floral print stand collar line |
| Closure | Zip or buttons, per your tech pack |
| Lining | Full or half lining |
| Fabric | 72.8%polyester 26.1%cotton 1.1%spandex 275gsm lining:100%polyester jacquard |
| Construction | Pattern repeat measured and matched across seams |
| Minimum order | 50 pcs per style, sizes mixed |
| Size range | XS to XXL, or your grade |
Lead time and inspection
Bulk runs 45-90 after PP approval and fabric confirmation. Sampling takes 7-10 days when the fabric is in house and 10-15 days when it is not. Every piece is inspected by default; where you specify AQL 2.5 we run sampling inspection to that standard instead, against ISO 2859-1, and send the report with the goods.
A woven program like this one runs at our knit and woven plant, where cutting and sewing sit under one QC protocol. Two plants, one standard, one merchandiser following your order across both. Other styles in this line sit under Jackets.
Questions buyers ask
Will the pattern match across the seams?
Yes, where the repeat allows it. We measure the repeat on the approved fabric, plan the marker around the matching points and confirm the layout with you before bulk cutting.
Can the pockets and closure be changed?
Yes. Pocket style and placement, closure hardware and lining are all built from your tech pack and confirmed on the approval sample.
What is the MOQ for this style?
50 pcs per style, sizes mixed inside that quantity. Colourways of the same style are quoted case by case.
What is the bulk lead time?
45 to 90 days for woven garments, counted after PP approval and fabric confirmation. Sampling runs 7 to 10 days when the fabric is in house, 10 to 15 days when it is not.



















