Blue Leaf Print Drawstring Waist Culottes
A culotte in a blue leaf jacquard, 95% polyester / 5% spandex, 220 to 250 gsm. Jacquard is a woven-in pattern, not a print, so the figure has floats on the back of the cloth. Left unmanaged those floats snag on rings and velcro, which is why inside finishing matters as much as the face here.
A culotte in a blue leaf jacquard, 95% polyester / 5% spandex, 220 to 250 gsm. Jacquard is a woven-in pattern, not a print, so the figure has floats on the back of the cloth. Left unmanaged those floats snag on rings and velcro, which is why inside finishing matters as much as the face here.
Fit and construction
Culotte cut, wide from the hip with a hem above the ankle, on a drawstring waist. The block is the critical choice on a culotte: too much hip fullness and it reads as a skirt gone wrong, too little and it loses the swing that sells it. The pattern match runs through the side seams so the leaf figure does not stop and restart at a seam.
What you can change
- Jacquard scale and colourway, subject to fabric minimums
- Hem height, culotte length to your spec
- Waistband, drawcord or elastic
- Lining, full or partial
Specification
| Style | Culotte, drawstring waist |
|---|---|
| Fit | Wide from hip, hem above ankle |
| Rise | Mid rise, built to your block |
| Waistband | Elastic waist with external drawstring |
| Fabric | 95% polyester / 5% spandex woven jacquard, 220-250 gsm |
| Construction | Inside floats sheared and finished, pattern matched at side seams |
| Minimum order | 50 pcs per style, sizes mixed |
| Size range | XS to XXL, or your grade |
Lead time and inspection
Bulk runs 45-90 after PP approval and fabric confirmation. Sampling takes 7-10 days when the fabric is in house and 10-15 days when it is not. Every piece is inspected by default; where you specify AQL 2.5 we run sampling inspection to that standard instead, against ISO 2859-1, and send the report with the goods.
A woven trouser program like this one runs at our knit and woven plant, where cutting and sewing sit under one QC protocol; flat-bed knitwear runs at the sweater plant. Two plants, one standard, one merchandiser following your order across both. Other styles in this line sit under Trousers & Shorts.
Questions buyers ask
Does jacquard snag in wear?
The face is tight, the risk is inside. We shear and finish the back of the cloth so the floats cannot catch on rings or velcro, and the approval sample is rub tested against a velcro swatch before bulk.
Can I change the rise or leg opening?
Yes. Rise, leg opening and inseam are all pattern variables. Send us the numbers off a pant you already sell and we build the block from those instead of from ours.
What is the MOQ for this style?
50 pcs per style, sizes mixed inside that quantity. Colourways of the same style are quoted case by case.
What is the bulk lead time?
45 to 90 days for woven trousers, counted after PP approval and fabric confirmation. Sampling runs 7 to 10 days when the fabric is in house, 10 to 15 days when it is not.



























