Brown Elastic Waist Wide Leg Pants with Contrast Side Stripe
A wide-leg pant in 260 gsm scuba, 55% polyamide / 38% viscose / 7% elastane, with a contrast stripe down the side. Scuba is a bonded knit that holds a sharp line, and the stripe is the test: set at cutting with notches, it has to run straight along the full leg or the eye catches the wobble immediately.
A wide-leg pant in 260 gsm scuba, 55% polyamide / 38% viscose / 7% elastane, with a contrast stripe down the side. Scuba is a bonded knit that holds a sharp line, and the stripe is the test: set at cutting with notches, it has to run straight along the full leg or the eye catches the wobble immediately.
Fit and construction
Elastic waist, wide leg from hip through hem. Scuba recovers well, and the number we watch is bagging at the seat and knee after wear, which the approval sample is tested for. The stripe is applied at the side seam with notched alignment points so the line stays true from waistband to hem.
What you can change
- Stripe width and colour, contrast or tonal
- Leg opening and inseam, per your tech pack
- Waistband elastic tension
- Hem finish, clean or bonded
Specification
| Style | Wide-leg pant, contrast side stripe |
|---|---|
| Fit | Wide leg from hip through hem |
| Rise | Mid rise, full elastic waist |
| Waistband | Full elastic waist |
| Fabric | 55% polyamide / 38% viscose / 7% elastane scuba, 260 gsm |
| Construction | Side stripe set with notched alignment, bagging tested on approval sample |
| Minimum order | 50 pcs per style, sizes mixed |
| Size range | XS to XXL, or your grade |
Lead time and inspection
Bulk runs 45-70 after PP approval and fabric confirmation. Sampling takes 7-10 days when the fabric is in house and 10-15 days when it is not. Every piece is inspected by default; where you specify AQL 2.5 we run sampling inspection to that standard instead, against ISO 2859-1, and send the report with the goods.
A knit trouser program like this one runs at our knit and woven plant, where cutting and sewing sit under one QC protocol; flat-bed knitwear runs at the sweater plant. Two plants, one standard, one merchandiser following your order across both. Other styles in this line sit under Trousers & Shorts.
Questions buyers ask
Does scuba bag at the knees?
Scuba recovers better than a flat knit, but we still bag-test the seat and knee on the approval sample after wear simulation, and that result goes in the report with the goods.
Will the side stripe stay straight?
The stripe is set at cutting against notched alignment points along the full leg, then checked at in-line inspection. A stripe applied by eye is how wobbly lines happen; we do not apply by eye.
What is the MOQ for this style?
50 pcs per style, sizes mixed inside that quantity. Colourways of the same style are quoted case by case.
What is the bulk lead time?
45 to 70 days for knit trousers, counted after PP approval and fabric confirmation. Sampling runs 7 to 10 days when the fabric is in house, 10 to 15 days when it is not.


























