Boho Chevron Knit Flare Pants
A boho flare pant in a 170 gsm yarn-dyed chevron knit with a full polyester lining, 95% polyester / 5% elastane. Chevron is the least forgiving pattern in a knit: the zigzag has to meet itself at the centre front and reverse cleanly at the side seams, and at 170 gsm the fabric is light enough to show every mistake.
A boho flare pant in a 170 gsm yarn-dyed chevron knit with a full polyester lining, 95% polyester / 5% elastane. Chevron is the least forgiving pattern in a knit: the zigzag has to meet itself at the centre front and reverse cleanly at the side seams, and at 170 gsm the fabric is light enough to show every mistake.
Fit and construction
Mid rise, fitted through the hip, flaring from the knee, with a lining that does two jobs: it hides the back of the chevron floats and it stops the lightweight knit going sheer. The waistband is stabilised so a light knit cannot grow at the waist after a day of wear.
What you can change
- Chevron scale and colourway, subject to fabric minimums
- Flare degree and inseam, per your tech pack
- Waistband height and stabiliser weight
- Lining fabric weight
Specification
| Style | Boho flare pant |
|---|---|
| Fit | Fitted hip, flare from knee |
| Rise | Mid rise |
| Waistband | Clean waistband with internal stabiliser |
| Fabric | 95% polyester / 5% elastane yarn-dyed chevron knit, 170 gsm |
| Construction | Chevron matched at centre front and side seams, full lining, stabilised waistband |
| Minimum order | 50 pcs per style, sizes mixed |
| Size range | XS to XXL, or your grade |
Lead time and inspection
Bulk runs 45-70 after PP approval and fabric confirmation. Sampling takes 7-10 days when the fabric is in house and 10-15 days when it is not. Every piece is inspected by default; where you specify AQL 2.5 we run sampling inspection to that standard instead, against ISO 2859-1, and send the report with the goods.
A knit trouser program like this one runs at our knit and woven plant, where cutting and sewing sit under one QC protocol; flat-bed knitwear runs at the sweater plant. Two plants, one standard, one merchandiser following your order across both. Other styles in this line sit under Trousers & Shorts.
Questions buyers ask
Will the chevron line up at the seams?
The zigzag is matched at the centre front, where the two halves meet, and reversed cleanly at the side seams. On a yarn-dyed knit this is a laying decision, made at the marker, and checked at in-line.
Is a 170 gsm knit too sheer for pants?
Not with the full lining this style carries. The lining also stops the knit growing at the seat, which is the usual failure on lightweight flares.
What is the MOQ for this style?
50 pcs per style, sizes mixed inside that quantity. Colourways of the same style are quoted case by case.
What is the bulk lead time?
45 to 70 days for knit trousers, counted after PP approval and fabric confirmation. Sampling runs 7 to 10 days when the fabric is in house, 10 to 15 days when it is not.

























