Opens in a new tab

Jersey vs Rib vs Interlock Knit: Structure, Stretch and Best Uses

2026-11-04
Share:

Jersey, rib and interlock are the three structures most knit programs are built on, and the differences are structural rather than cosmetic. Knowing what each loop construction does tells you how the garment stretches, whether the edge curls, and which styles the fabric can honestly carry.

The structures, one paragraph each

Jersey is a single knit: loops drawn in one direction on one needle bed. It is light, stretches mostly crosswise, and the cut edge curls, which is why hems and plackets on jersey need finishing. Rib is two needle beds alternating, giving columns of face and back loops: that is the 1×1 or 2×2 texture on cuffs and necks, and it stretches in both directions with strong recovery. Interlock is two jersey layers locked together, which makes it heavier, smoother on both faces, stable at the edge and the least stretchy of the three.

PropertyJerseyRib (1×1 / 2×2)Interlock
Weight range120 to 200 gsm180 to 320 gsm200 to 350 gsm
StretchCrosswise mainlyBoth directions, highModerate, both faces
Edge behaviourCurls, needs finishingStable, does not curlStable, does not curl
RecoveryNeeds elastane for returnExcellent, even without elastaneGood, structure carries it
Typical stylesT-shirts, dresses, liningsCuffs, necks, fitted topsPolo shirts, heavier tops, trousers

What it means at the machine

All three run on circular knitting at our knit and woven plant, gauges from 12G to 28G depending on fineness. Structure choice is upstream of gauge: a 2×2 rib needs twice the needle allocation of jersey at the same fineness, which is one reason rib carries a higher price per kilo for the same fibre. Elastane is a separate decision from structure. Recovery is a structure property first; elastane tunes it, and recovery is wash-tested before bulk because fabric that stretches and does not return turns into knee bagging and returns.

Choosing per style, not per catalogue

The honest way to pick is from the silhouette backwards. A drapey dress wants jersey and accepts the hem finishing. A fitted neckline wants rib because recovery is structural. A heavier top that must not curl at the pocket wants interlock. Programs that force one structure across every style usually discover it at the fit round. The consumer-level version of this fabric logic sits in our fashion fabric guide, which pairs structures with garment categories.

Frequently asked questions

Why does jersey curl and rib does not?

Jersey’s single-side loop structure pulls the cut edge toward the face. Rib and interlock balance face and back loops, so the forces cancel and the edge sits flat.

Can interlock replace jersey in a lighter style?

It changes the garment. Interlock at the same nominal weight feels denser and drapes less, so the replacement is a design decision, not a swap on the order sheet.

Does rib always need elastane?

No. Rib’s structure gives strong recovery on its own, which is why cotton cuffs work. Elastane is added when the fit must hold through repeated wear cycles, and the blend is confirmed by wash test before bulk.

Search
×

FeedBack

Please leave your information, we will contact you as soon as possible

popups form