Burgundy Satin High Waist Wide Leg Pants
A high-waist wide-leg pant in 100% polyester satin. Satin earns its place on evening and occasion programs for the drape, and it punishes factories on two details: heat, which glazes the face, and seam slippage, which opens a seam at the first deep squat. Both are process decisions, not fabric luck.
A high-waist wide-leg pant in 100% polyester satin. Satin earns its place on evening and occasion programs for the drape, and it punishes factories on two details: heat, which glazes the face, and seam slippage, which opens a seam at the first deep squat. Both are process decisions, not fabric luck.
Fit and construction
High rise at the natural waist feeding a wide leg from hip through hem. The luster reads darkest when every panel is laid in the same direction, so the marker is one-directional even at a fabric cost. Seams are run at a higher stitch density than a casual pant, because satin yarns slip under load before the thread breaks.
What you can change
- Face selection, glossy or matte side out
- Leg opening and inseam, per your tech pack
- Waistband with or without an internal grip stay
- Hem finish, blind stitch or visible topstitch
Specification
| Style | High-waist wide-leg pant |
|---|---|
| Fit | Wide leg from hip through hem |
| Rise | High rise, sits at natural waist |
| Waistband | Clean waistband with zip closure per your tech pack |
| Fabric | 100% polyester satin, woven |
| Construction | One-directional laying, high stitch density against seam slippage |
| Minimum order | 50 pcs per style, sizes mixed |
| Size range | XS to XXL, or your grade |
Lead time and inspection
Bulk runs 45-90 after PP approval and fabric confirmation. Sampling takes 7-10 days when the fabric is in house and 10-15 days when it is not. Every piece is inspected by default; where you specify AQL 2.5 we run sampling inspection to that standard instead, against ISO 2859-1, and send the report with the goods.
A woven trouser program like this one runs at our knit and woven plant, where cutting and sewing sit under one QC protocol; flat-bed knitwear runs at the sweater plant. Two plants, one standard, one merchandiser following your order across both. Other styles in this line sit under Trousers & Shorts.
Questions buyers ask
Will the satin show pressing marks?
Not if it is pressed right. Polyester satin glazes under a hot dry iron, so we press with a cloth at low heat and finish with steam on the approval sample, and the same recipe goes into the bulk fining sheet.
Can I change the rise or leg opening?
Yes. Rise, leg opening and inseam are all pattern variables. Send us the numbers off a pant you already sell and we build the block from those instead of from ours.
What is the MOQ for this style?
50 pcs per style, sizes mixed inside that quantity. Colourways of the same style are quoted case by case.
What is the bulk lead time?
45 to 90 days for woven trousers, counted after PP approval and fabric confirmation. Sampling runs 7 to 10 days when the fabric is in house, 10 to 15 days when it is not.



























